High Quality Carbon Steel Punching Part

High Quality Carbon Steel Punching Part

Carbon steel Stamping is a kind of process that obtaining the required shape and size of the parts by outside force on the metal sheet, strip, pipe shape material use mould and press machine, in order to produce plastic deformation or separation. Stamping and forging belong to plastic processing (or pressure processing), called the forging press. The mainly stamping billets are hot rolling and cold rolling steel plate and steel belt.

Stamping processing is a production technology that use of conventional or special equipment of the power, make the deformation sheet metal deformation in the mould. Thereby produce a certain shape, size and performance parts. Sheet metal, stamping mould and equipment are the three elements of stamping.

Carbon steel Stamping characteristics:

Compared with the castings, forgings, stamping parts have the thin, uniform, light and strong characteristic. Stamping can make other methods are difficult to manufacture, such as rib stiffener, flanging, ups and downs, or flanging products, in order to improve its stiffness. Because use precision mould, the precision of part can reach micron grade, and repeat precision is high, the specification is consistent, can punch a hole nest, convex sets, etc. Cold stamping generally no longer by machining, or only need a small amount of machining. Hot stamping precision and surface state is lower than the cold stamping parts, but it's still better than the castings, forgings, less cutting processing capacity.

Metal Stamping Parts are widely used in our daily lives in all areas, including automobile, trailer industry, agricultural machinery, furniture, household appliances parts,construction industry etc..

Electrical appliances stamping parts is refers to the hardware that is used in electric appliances, applied to electrical hardware.

(1Appliances stamping processing of high production efficiency, and easy to operate, easy to realize mechanization and automation.

(2)Stamping of stable quality, good compatibility, has the characteristics of "the same".

(3)Electrical appliances stamping machining size range is larger, more complex shape parts

(4Stamping is a kind of save on material, processing method of energy saving, stamping parts of the cost is low.

The process classification of stamping:

Stamping is mainly classification by process, can be divided into separation process and forming process. Separation process is also called the blanking, and its purpose is to make the sheet metal of stamping parts separated along the contour line, and at the same time guarantee the quality of the separation section requirements. Forming process is designed to make sheet metal occurred plastic deformation under the condition of not to break the billet, made into the required shape and size of parts. In the actual production, it is often a variety processes integrated applied to one part. Cutting, bending, shear, deep drawing, bulging, spinning, correction are the main stamping processes.

The conventional material of carbon steel stamping part: #25 steel, #45 steel, #50 steel;

The precision of the carbon steel pressing part: ±0.1mm;

The thickness of the metal sheet we can do: 0.5mm~12mm;

The max size of the stamping part in my factory: 1mX1m;

Surface preparation methods: Powder coating, Painting, Plating, Electrophoresis, Polishing.

The carbon steel punching and QC control equipment

Product Categories : Metal Stamping Part